Hex Flange Bolt Din 6921 Cl 8.8 plian
| Produkt namme | HEX BOLT DIN 931/ISO4014 heale tried |
| Standert | DIN,ASTM/ANSI JIS EN ISO,AS,GB |
| Klasse | Steel Grade: DIN: Gr.4.6,4.8,5.6,5.8,8.8,10.9,12.9;SAE: Gr.2,5,8; ASTM: 307A,A325,A490, |
| Finishing | Sink (Giel, Wyt, Blau, Swart), Hop Dip Galvanized (HDG), Swart Okside, Geomet, Dacroment, anodisaasje, Nikkel plated, Sink-Nikkel plated |
| Produksjeproses | M2-M24: Cold Froging, M24-M100 Hot Forging, Machtigingsformulier en CNC foar oanpaste fastener |
| Oanpaste produkten Lead tiid | 30-60 dagen, |
| Skroeftried | M1.6 | M2 | M2.5 | M3 | (M3.5) | M4 | M5 | M6 | (M7) | M8 | M10 | M12 | ||
| P | Pitch | 0,35 | 0.4 | 0.45 | 0.5 | 0.6 | 0.7 | 0.8 | 1 | 1 | 1.25 | 1.5 | 1.75 | |
| b | L≤125 | 9 | 10 | 11 | 12 | 13 | 14 | 16 | 18 | 20 | 22 | 26 | 30 | |
| 125＜L≤200 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 26 | 28 | 32 | 36 | ||
| L＞200 | 28 | 29 | 30 | 31 | 32 | 33 | 35 | 37 | 39 | 41 | 45 | 49 | ||
| c | max | 0.25 | 0.25 | 0.25 | 0.4 | 0.4 | 0.4 | 0.5 | 0.5 | 0.6 | 0.6 | 0.6 | 0.6 | |
| min | 0.1 | 0.1 | 0.1 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | ||
| da | max | 2 | 2.6 | 3.1 | 3.6 | 4.1 | 4.7 | 5.7 | 6.8 | 7.8 | 9.2 | 11.2 | 13.7 | |
| ds | max = nominale grutte | 1.6 | 2 | 2.5 | 3 | 3.5 | 4 | 5 | 6 | 7 | 8 | 10 | 12 | |
| Klasse A | min | 1.46 | 1.86 | 2.36 | 2.86 | 3.32 | 3.82 | 4.82 | 5.82 | 6.78 | 7.78 | 9.78 | 11.73 | |
| Klasse B | min | 1.35 | 1.75 | 2.25 | 2.75 | 3.2 | 3.7 | 4.7 | 5.7 | 6.64 | 7.64 | 9.64 | 11.57 | |
| dw | Klasse A | min | 2.54 | 3.34 | 4.34 | 4.84 | 5.34 | 6.2 | 7.2 | 8.88 | 9.63 | 11.63 | 14.63 | 16.63 |
| Klasse B | min | 2.42 | 3.22 | 4.22 | 4.72 | 5.22 | 6.06 | 7.06 | 8.74 | 9.47 | 11.47 | 14.47 | 16.47 | |
| e | Klasse A | min | 3.41 | 4.32 | 5.45 | 6.01 | 6.58 | 7.66 | 8.79 | 11.05 | 12.12 | 14.38 | 17.77 | 20.03 |
| Klasse B | min | 3.28 | 4.18 | 5.31 | 5.88 | 6.44 | 7.5 | 8.63 | 10.89 | 11.94 | 14.2 | 17.59 | 19.85 | |
| L1 | max | 0.6 | 0.8 | 1 | 1 | 1 | 1.2 | 1.2 | 1.4 | 1.4 | 2 | 2 | 3 | |
| k | Nominale Grutte | 1.1 | 1.4 | 1.7 | 2 | 2.4 | 2.8 | 3.5 | 4 | 4.8 | 5.3 | 6.4 | 7.5 | |
| Klasse A | max | 1.225 | 1.525 | 1.825 | 2.125 | 2.525 | 2.925 | 3.65 | 4.15 | 4.95 | 5.45 | 6.58 | 7.68 | |
| min | 0.975 | 1.275 | 1.575 | 1.875 | 2.275 | 2.675 | 3.35 | 3.85 | 4.65 | 5.15 | 6.22 | 7.32 | ||
| Klasse B | max | 1.3 | 1.6 | 1.9 | 2.2 | 2.6 | 3 | 3.74 | 4.24 | 5.04 | 5.54 | 6.69 | 7.79 | |
| min | 0.9 | 1.2 | 1.5 | 1.8 | 2.2 | 2.6 | 3.26 | 3.76 | 4.56 | 5.06 | 6.11 | 7.21 | ||
| k1 | Klasse A | min | 0.68 | 0.89 | 1.1 | 1.31 | 1.59 | 1.87 | 2.35 | 2.7 | 3.26 | 3.61 | 4.35 | 5.12 |
| Klasse B | min | 0.63 | 0.84 | 1.05 | 1.26 | 1.54 | 1.82 | 2.28 | 2.63 | 3.19 | 3.54 | 4.28 | 5.05 | |
| r | min | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.2 | 0.2 | 0.25 | 0.25 | 0.4 | 0.4 | 0.6 | |
| s | max = nominale grutte | 3.2 | 4 | 5 | 5.5 | 6 | 7 | 8 | 10 | 11 | 13 | 16 | 18 | |
| Klasse A | min | 3.02 | 3.82 | 4.82 | 5.32 | 5.82 | 6.78 | 7.78 | 9.78 | 10.73 | 12.73 | 15.73 | 17.73 | |
| Klasse B | min | 2.9 | 3.7 | 4.7 | 5.2 | 5.7 | 6.64 | 7.64 | 9.64 | 10.57 | 12.57 | 15.57 | 17.57 | |
| Threadlengte b | - | - | - | - | - | - | - | - | - | - | - | - | ||
| Skroeftried | (M14) | M16 | (M18) | M20 | (M22) | M24 | (M27) | M30 | (M33) | M36 | (M39) | M42 | ||
| P | Pitch | 2 | 2 | 2.5 | 2.5 | 2.5 | 3 | 3 | 3.5 | 3.5 | 4 | 4 | 4.5 | |
| b | L≤125 | 34 | 38 | 42 | 46 | 50 | 54 | 60 | 66 | 72 | - | - | - | |
| 125＜L≤200 | 40 | 44 | 48 | 52 | 56 | 60 | 66 | 72 | 78 | 84 | 90 | 96 | ||
| L＞200 | 53 | 57 | 61 | 65 | 69 | 73 | 79 | 85 | 91 | 97 | 103 | 109 | ||
| c | max | 0.6 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 1 | 1 | |
| min | 0.15 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.3 | 0.3 | ||
| da | max | 15.7 | 17.7 | 20.2 | 22.4 | 24.4 | 26.4 | 30.4 | 33.4 | 36.4 | 39.4 | 42.4 | 45,6 | |
| ds | max = nominale grutte | 14 | 16 | 18 | 20 | 22 | 24 | 27 | 30 | 33 | 36 | 39 | 42 | |
| Klasse A | min | 13.73 | 15.73 | 17.73 | 19.67 | 21.67 | 23.67 | - | - | - | - | - | - | |
| Klasse B | min | 13.57 | 15.57 | 17.57 | 19.48 | 21.48 | 23.48 | 26.48 | 29.48 | 32.38 | 35.38 | 38.38 | 41.38 | |
| dw | Klasse A | min | 19.64 | 22.49 | 25.34 | 28.19 | 31.71 | 33.61 | - | - | - | - | - | - |
| Klasse B | min | 19.15 | 22 | 24.85 | 27.7 | 31.35 | 33.25 | 38 | 42.75 | 46.55 | 51.11 | 55.86 | 59.95 | |
| e | Klasse A | min | 23.36 | 26.75 | 30.14 | 33.53 | 37.72 | 39.98 | - | - | - | - | - | - |
| Klasse B | min | 22.78 | 26.17 | 29.56 | 32.95 | 37.29 | 39.55 | 45.2 | 50.85 | 55.37 | 60.79 | 66.44 | 71.3 | |
| L1 | max | 3 | 3 | 3 | 4 | 4 | 4 | 6 | 6 | 6 | 6 | 6 | 8 | |
| k | Nominale Grutte | 8.8 | 10 | 11.5 | 12.5 | 14 | 15 | 17 | 18.7 | 21 | 22.5 | 25 | 26 | |
| Klasse A | max | 8.98 | 10.18 | 11.715 | 12.715 | 14.215 | 15.215 | - | - | - | - | - | - | |
| min | 8.62 | 9.82 | 11.285 | 12.285 | 13.785 | 14.785 | - | - | - | - | - | - | ||
| Klasse B | max | 9.09 | 10.29 | 11.85 | 12.85 | 14.35 | 15.35 | 17.35 | 19.12 | 21.42 | 22.92 | 25.42 | 26.42 | |
| min | 8.51 | 9.71 | 11.15 | 12.15 | 13.65 | 14.65 | 16.65 | 18.28 | 20.58 | 22.08 | 24.58 | 25.58 | ||
| k1 | Klasse A | min | 6.03 | 6.87 | 7.9 | 8.6 | 9.65 | 10.35 | - | - | - | - | - | - |
| Klasse B | min | 5.96 | 6.8 | 7.81 | 8.51 | 9.56 | 10.26 | 11.66 | 12.8 | 14.41 | 15.46 | 17.21 | 17.91 | |
| r | min | 0.6 | 0.6 | 0.6 | 0.8 | 0.8 | 0.8 | 1 | 1 | 1 | 1 | 1 | 1.2 | |
| s | max = nominale grutte | 21 | 24 | 27 | 30 | 34 | 36 | 41 | 46 | 50 | 55 | 60 | 65 | |
| Klasse A | min | 20.67 | 23.67 | 26.67 | 29.67 | 33.38 | 35.38 | - | - | - | - | - | - | |
| Klasse B | min | 20.16 | 23.16 | 26.16 | 29.16 | 33 | 35 | 40 | 45 | 49 | 53.8 | 58.8 | 63.1 | |
| Threadlengte b | - | - | - | - | - | - | - | - | - | - |
|
| ||
| Skroeftried | (M45) | M48 | (M52) | M56 | (M60) | M64 |
|
|
|
|
|
| ||
| P | Pitch | 4.5 | 5 | 5 | 5.5 | 5.5 | 6 |
|
|
|
|
|
| |
| b | L≤125 | - | - | - | - | - | - |
|
|
|
|
|
| |
| 125＜L≤200 | 102 | 108 | 116 | - | - | - |
|
|
|
|
|
| ||
| L＞200 | 115 | 121 | 129 | 137 | 145 | 153 |
|
|
|
|
|
| ||
| c | max | 1 | 1 | 1 | 1 | 1 | 1 |
|
|
|
|
|
| |
| min | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 |
|
|
|
|
|
| ||
| da | max | 48,6 | 52.6 | 56.6 | 63 | 67 | 71 |
|
|
|
|
|
| |
| ds | max = nominale grutte | 45 | 48 | 52 | 56 | 60 | 64 |
|
|
|
|
|
| |
| Klasse A | min | - | - | - | - | - | - |
|
|
|
|
|
| |
| Klasse B | min | 44.38 | 47.38 | 51.26 | 55.26 | 59.26 | 63.26 |
|
|
|
|
|
| |
| dw | Klasse A | min | - | - | - | - | - | - |
|
|
|
|
|
|
| Klasse B | min | 64,7 | 69.45 | 74.2 | 78.66 | 83.41 | 88.16 |
|
|
|
|
|
| |
| e | Klasse A | min | - | - | - | - | - | - |
|
|
|
|
|
|
| Klasse B | min | 76.95 | 82.6 | 88.25 | 93.56 | 99.21 | 104.86 |
|
|
|
|
|
| |
| L1 | max | 8 | 10 | 10 | 12 | 12 | 13 |
|
|
|
|
|
| |
| k | Nominale Grutte | 28 | 30 | 33 | 35 | 38 | 40 |
|
|
|
|
|
| |
| Klasse A | max | - | - | - | - | - | - |
|
|
|
|
|
| |
| min | - | - | - | - | - | - |
|
|
|
|
|
| ||
| Klasse B | max | 28.42 | 30.42 | 33.5 | 35,5 | 38,5 | 40,5 |
|
|
|
|
|
| |
| min | 27.58 | 29.58 | 32.5 | 34.5 | 37,5 | 39,5 |
|
|
|
|
|
| ||
| k1 | Klasse A | min | - | - | - | - | - | - |
|
|
|
|
|
|
| Klasse B | min | 19.31 | 20.71 | 22.75 | 24.15 | 26.25 | 27.65 |
|
|
|
|
|
| |
| r | min | 1.2 | 1.6 | 1.6 | 2 | 2 | 2 |
|
|
|
|
|
| |
| s | max = nominale grutte | 70 | 75 | 80 | 85 | 90 | 95 |
|
|
|
|
|
| |
| Klasse A | min | - | - | - | - | - | - |
|
|
|
|
|
| |
| Klasse B | min | 68.1 | 73.1 | 78.1 | 82.8 | 87.8 | 92.8 |
|
|
|
|
|
| |
| Threadlengte b | - | - | - | - | - | - |
|
|
|
|
| |||
Funksjes en foardielen
Flange Bolt Din 6921 Cl 8.8 is in hege-sterkte fastener faak brûkt yn swiere-duty applikaasjes.It is in soarte fan flange bolt dat is ûntwurpen mei in washer-lykas flange oan de basis, dy't soarget foar ekstra stipe en foarkomt dat de bolt út loosening fanwege trilling of koppel.De bout hat in hexagonkop dy't maklik ynstallaasje en ferwidering mooglik makket mei in moersleutel of tang.
Produsearre yn oerienstimming mei de DIN 6921-standert, foldocht dizze flensbout oan spesifike easken foar threadgrutte, lingte en pitch, lykas materiaal en meganyske eigenskippen.It is makke fan medium koalstofstiel legere mei eleminten lykas chromium, molybdenum en vanadium, dy't har sterkte en duorsumens ferbetterje.De bout is ek bedekt mei in beskermjende laach, lykas sink plating of galvanization, dat foarkomt corrosie en roest formaasje.
Dizze flangebout hat in klasse 8.8-wurdearring, wat oanjout op syn treksterkte fan op syn minst 800 N / mm2 en opbringststerkte fan op syn minst 640 N / mm2.Dit makket it geskikt foar gebrûk yn tapassingen dy't hege klemkrêft en ferset tsjin wurgens, ynfloed en laterale krêften fereaskje.It wurdt faak brûkt yn automotive, bou, masines, en yndustriële apparatuer applikaasjes.
De lingte fan de bout fariearret ôfhinklik fan de spesifike applikaasje easken, fariearjend fan 10 mm oant 100 mm of mear.De threadgrutte farieart fan M6 oant M30 of grutter, mei ferskate toanhichtetypen beskikber lykas fyn, grof en ekstra-grof.De hexagon-kop kin flange of ôfskuorre wurde en kin ek in útsparring of in markearring hawwe om de fabrikant of klasse oan te jaan.
Oer it algemien is Flange Bolt Din 6921 Cl 8.8 in betroubere en duorsume befestigingsoplossing dy't poerbêste sterkte, stabiliteit en korrosjebestriding leveret.It ûntwerp fan hege kwaliteit en krekte fabrikaazje soargje foar optimale prestaasjes en feiligens yn ferskate swiere applikaasjes.
