Hex Bolt Din 931 / iso4014 933 / iso4017 Grade 4.8
| Produkt namme | HEX BOLT DIN 931/ISO4014 heale tried |
| Standert | DIN,ASTM/ANSI JIS EN ISO,AS,GB |
| Klasse | Steel Grade: DIN: Gr.4.6,4.8,5.6,5.8,8.8,10.9,12.9;SAE: Gr.2,5,8; ASTM: 307A,A325,A490, |
| Finishing | Sink (Giel, Wyt, Blau, Swart), Hop Dip Galvanized (HDG), Swart Okside, Geomet, Dacroment, anodisaasje, Nikkel plated, Sink-Nikkel plated |
| Produksjeproses | M2-M24: Cold Froging, M24-M100 Hot Forging, Machtigingsformulier en CNC foar oanpaste fastener |
| Oanpaste produkten Lead tiid | 30-60 dagen, |
| Skroeftried | M1.6 | M2 | M2.5 | M3 | (M3.5) | M4 | M5 | M6 | (M7) | M8 | M10 | M12 | ||
| P | Pitch | 0,35 | 0.4 | 0.45 | 0.5 | 0.6 | 0.7 | 0.8 | 1 | 1 | 1.25 | 1.5 | 1.75 | |
| b | L≤125 | 9 | 10 | 11 | 12 | 13 | 14 | 16 | 18 | 20 | 22 | 26 | 30 | |
| 125＜L≤200 | 15 | 16 | 17 | 18 | 19 | 20 | 22 | 24 | 26 | 28 | 32 | 36 | ||
| L＞200 | 28 | 29 | 30 | 31 | 32 | 33 | 35 | 37 | 39 | 41 | 45 | 49 | ||
| c | max | 0.25 | 0.25 | 0.25 | 0.4 | 0.4 | 0.4 | 0.5 | 0.5 | 0.6 | 0.6 | 0.6 | 0.6 | |
| min | 0.1 | 0.1 | 0.1 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | 0.15 | ||
| da | max | 2 | 2.6 | 3.1 | 3.6 | 4.1 | 4.7 | 5.7 | 6.8 | 7.8 | 9.2 | 11.2 | 13.7 | |
| ds | max = nominale grutte | 1.6 | 2 | 2.5 | 3 | 3.5 | 4 | 5 | 6 | 7 | 8 | 10 | 12 | |
| Klasse A | min | 1.46 | 1.86 | 2.36 | 2.86 | 3.32 | 3.82 | 4.82 | 5.82 | 6.78 | 7.78 | 9.78 | 11.73 | |
| Klasse B | min | 1.35 | 1.75 | 2.25 | 2.75 | 3.2 | 3.7 | 4.7 | 5.7 | 6.64 | 7.64 | 9.64 | 11.57 | |
| dw | Klasse A | min | 2.54 | 3.34 | 4.34 | 4.84 | 5.34 | 6.2 | 7.2 | 8.88 | 9.63 | 11.63 | 14.63 | 16.63 |
| Klasse B | min | 2.42 | 3.22 | 4.22 | 4.72 | 5.22 | 6.06 | 7.06 | 8.74 | 9.47 | 11.47 | 14.47 | 16.47 | |
| e | Klasse A | min | 3.41 | 4.32 | 5.45 | 6.01 | 6.58 | 7.66 | 8.79 | 11.05 | 12.12 | 14.38 | 17.77 | 20.03 |
| Klasse B | min | 3.28 | 4.18 | 5.31 | 5.88 | 6.44 | 7.5 | 8.63 | 10.89 | 11.94 | 14.2 | 17.59 | 19.85 | |
| L1 | max | 0.6 | 0.8 | 1 | 1 | 1 | 1.2 | 1.2 | 1.4 | 1.4 | 2 | 2 | 3 | |
| k | Nominale Grutte | 1.1 | 1.4 | 1.7 | 2 | 2.4 | 2.8 | 3.5 | 4 | 4.8 | 5.3 | 6.4 | 7.5 | |
| Klasse A | max | 1.225 | 1.525 | 1.825 | 2.125 | 2.525 | 2.925 | 3.65 | 4.15 | 4.95 | 5.45 | 6.58 | 7.68 | |
| min | 0.975 | 1.275 | 1.575 | 1.875 | 2.275 | 2.675 | 3.35 | 3.85 | 4.65 | 5.15 | 6.22 | 7.32 | ||
| Klasse B | max | 1.3 | 1.6 | 1.9 | 2.2 | 2.6 | 3 | 3.74 | 4.24 | 5.04 | 5.54 | 6.69 | 7.79 | |
| min | 0.9 | 1.2 | 1.5 | 1.8 | 2.2 | 2.6 | 3.26 | 3.76 | 4.56 | 5.06 | 6.11 | 7.21 | ||
| k1 | Klasse A | min | 0.68 | 0.89 | 1.1 | 1.31 | 1.59 | 1.87 | 2.35 | 2.7 | 3.26 | 3.61 | 4.35 | 5.12 |
| Klasse B | min | 0.63 | 0.84 | 1.05 | 1.26 | 1.54 | 1.82 | 2.28 | 2.63 | 3.19 | 3.54 | 4.28 | 5.05 | |
| r | min | 0.1 | 0.1 | 0.1 | 0.1 | 0.1 | 0.2 | 0.2 | 0.25 | 0.25 | 0.4 | 0.4 | 0.6 | |
| s | max = nominale grutte | 3.2 | 4 | 5 | 5.5 | 6 | 7 | 8 | 10 | 11 | 13 | 16 | 18 | |
| Klasse A | min | 3.02 | 3.82 | 4.82 | 5.32 | 5.82 | 6.78 | 7.78 | 9.78 | 10.73 | 12.73 | 15.73 | 17.73 | |
| Klasse B | min | 2.9 | 3.7 | 4.7 | 5.2 | 5.7 | 6.64 | 7.64 | 9.64 | 10.57 | 12.57 | 15.57 | 17.57 | |
| Threadlengte b | - | - | - | - | - | - | - | - | - | - | - | - | ||
| Skroeftried | (M14) | M16 | (M18) | M20 | (M22) | M24 | (M27) | M30 | (M33) | M36 | (M39) | M42 | ||
| P | Pitch | 2 | 2 | 2.5 | 2.5 | 2.5 | 3 | 3 | 3.5 | 3.5 | 4 | 4 | 4.5 | |
| b | L≤125 | 34 | 38 | 42 | 46 | 50 | 54 | 60 | 66 | 72 | - | - | - | |
| 125＜L≤200 | 40 | 44 | 48 | 52 | 56 | 60 | 66 | 72 | 78 | 84 | 90 | 96 | ||
| L＞200 | 53 | 57 | 61 | 65 | 69 | 73 | 79 | 85 | 91 | 97 | 103 | 109 | ||
| c | max | 0.6 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 1 | 1 | |
| min | 0.15 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.2 | 0.3 | 0.3 | ||
| da | max | 15.7 | 17.7 | 20.2 | 22.4 | 24.4 | 26.4 | 30.4 | 33.4 | 36.4 | 39.4 | 42.4 | 45,6 | |
| ds | max = nominale grutte | 14 | 16 | 18 | 20 | 22 | 24 | 27 | 30 | 33 | 36 | 39 | 42 | |
| Klasse A | min | 13.73 | 15.73 | 17.73 | 19.67 | 21.67 | 23.67 | - | - | - | - | - | - | |
| Klasse B | min | 13.57 | 15.57 | 17.57 | 19.48 | 21.48 | 23.48 | 26.48 | 29.48 | 32.38 | 35.38 | 38.38 | 41.38 | |
| dw | Klasse A | min | 19.64 | 22.49 | 25.34 | 28.19 | 31.71 | 33.61 | - | - | - | - | - | - |
| Klasse B | min | 19.15 | 22 | 24.85 | 27.7 | 31.35 | 33.25 | 38 | 42.75 | 46.55 | 51.11 | 55.86 | 59.95 | |
| e | Klasse A | min | 23.36 | 26.75 | 30.14 | 33.53 | 37.72 | 39.98 | - | - | - | - | - | - |
| Klasse B | min | 22.78 | 26.17 | 29.56 | 32.95 | 37.29 | 39.55 | 45.2 | 50.85 | 55.37 | 60.79 | 66.44 | 71.3 | |
| L1 | max | 3 | 3 | 3 | 4 | 4 | 4 | 6 | 6 | 6 | 6 | 6 | 8 | |
| k | Nominale Grutte | 8.8 | 10 | 11.5 | 12.5 | 14 | 15 | 17 | 18.7 | 21 | 22.5 | 25 | 26 | |
| Klasse A | max | 8.98 | 10.18 | 11.715 | 12.715 | 14.215 | 15.215 | - | - | - | - | - | - | |
| min | 8.62 | 9.82 | 11.285 | 12.285 | 13.785 | 14.785 | - | - | - | - | - | - | ||
| Klasse B | max | 9.09 | 10.29 | 11.85 | 12.85 | 14.35 | 15.35 | 17.35 | 19.12 | 21.42 | 22.92 | 25.42 | 26.42 | |
| min | 8.51 | 9.71 | 11.15 | 12.15 | 13.65 | 14.65 | 16.65 | 18.28 | 20.58 | 22.08 | 24.58 | 25.58 | ||
| k1 | Klasse A | min | 6.03 | 6.87 | 7.9 | 8.6 | 9.65 | 10.35 | - | - | - | - | - | - |
| Klasse B | min | 5.96 | 6.8 | 7.81 | 8.51 | 9.56 | 10.26 | 11.66 | 12.8 | 14.41 | 15.46 | 17.21 | 17.91 | |
| r | min | 0.6 | 0.6 | 0.6 | 0.8 | 0.8 | 0.8 | 1 | 1 | 1 | 1 | 1 | 1.2 | |
| s | max = nominale grutte | 21 | 24 | 27 | 30 | 34 | 36 | 41 | 46 | 50 | 55 | 60 | 65 | |
| Klasse A | min | 20.67 | 23.67 | 26.67 | 29.67 | 33.38 | 35.38 | - | - | - | - | - | - | |
| Klasse B | min | 20.16 | 23.16 | 26.16 | 29.16 | 33 | 35 | 40 | 45 | 49 | 53.8 | 58.8 | 63.1 | |
| Threadlengte b | - | - | - | - | - | - | - | - | - | - |
|
| ||
| Skroeftried | (M45) | M48 | (M52) | M56 | (M60) | M64 |
|
|
|
|
|
| ||
| P | Pitch | 4.5 | 5 | 5 | 5.5 | 5.5 | 6 |
|
|
|
|
|
| |
| b | L≤125 | - | - | - | - | - | - |
|
|
|
|
|
| |
| 125＜L≤200 | 102 | 108 | 116 | - | - | - |
|
|
|
|
|
| ||
| L＞200 | 115 | 121 | 129 | 137 | 145 | 153 |
|
|
|
|
|
| ||
| c | max | 1 | 1 | 1 | 1 | 1 | 1 |
|
|
|
|
|
| |
| min | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 |
|
|
|
|
|
| ||
| da | max | 48,6 | 52.6 | 56.6 | 63 | 67 | 71 |
|
|
|
|
|
| |
| ds | max = nominale grutte | 45 | 48 | 52 | 56 | 60 | 64 |
|
|
|
|
|
| |
| Klasse A | min | - | - | - | - | - | - |
|
|
|
|
|
| |
| Klasse B | min | 44.38 | 47.38 | 51.26 | 55.26 | 59.26 | 63.26 |
|
|
|
|
|
| |
| dw | Klasse A | min | - | - | - | - | - | - |
|
|
|
|
|
|
| Klasse B | min | 64,7 | 69.45 | 74.2 | 78.66 | 83.41 | 88.16 |
|
|
|
|
|
| |
| e | Klasse A | min | - | - | - | - | - | - |
|
|
|
|
|
|
| Klasse B | min | 76.95 | 82.6 | 88.25 | 93.56 | 99.21 | 104.86 |
|
|
|
|
|
| |
| L1 | max | 8 | 10 | 10 | 12 | 12 | 13 |
|
|
|
|
|
| |
| k | Nominale Grutte | 28 | 30 | 33 | 35 | 38 | 40 |
|
|
|
|
|
| |
| Klasse A | max | - | - | - | - | - | - |
|
|
|
|
|
| |
| min | - | - | - | - | - | - |
|
|
|
|
|
| ||
| Klasse B | max | 28.42 | 30.42 | 33.5 | 35,5 | 38,5 | 40,5 |
|
|
|
|
|
| |
| min | 27.58 | 29.58 | 32.5 | 34.5 | 37,5 | 39,5 |
|
|
|
|
|
| ||
| k1 | Klasse A | min | - | - | - | - | - | - |
|
|
|
|
|
|
| Klasse B | min | 19.31 | 20.71 | 22.75 | 24.15 | 26.25 | 27.65 |
|
|
|
|
|
| |
| r | min | 1.2 | 1.6 | 1.6 | 2 | 2 | 2 |
|
|
|
|
|
| |
| s | max = nominale grutte | 70 | 75 | 80 | 85 | 90 | 95 |
|
|
|
|
|
| |
| Klasse A | min | - | - | - | - | - | - |
|
|
|
|
|
| |
| Klasse B | min | 68.1 | 73.1 | 78.1 | 82.8 | 87.8 | 92.8 |
|
|
|
|
|
| |
| Threadlengte b | - | - | - | - | - | - |
|
|
|
|
| |||
Funksjes en foardielen
Yn 'e wrâld fan fasteners binne Hex Bolt Din 931, ISO4014 933, en ISO4017 Grade 4.8 guon fan 'e meast socht produkten.Dizze hex-bouten binne stapels yn bou en fabrikaazje, om't se poerbêste stabiliteit, duorsumens biede en hege druk en spanning kinne wjerstean.
De Hex Bolt Din 931, ISO4014 933, en ISO4017 Grade 4.8 binne beskikber yn in ferskaat oan maten foar ferskate tapassingen.Dizze bouten binne makke fan koalstofstiel mei in plated finish, soargje foar roest en korrosjebestriding.Se binne ûntworpen mei seissidige koppen om in feilige grip te jaan foar ark lykas in moersleutel of tang.Hexbouten wurde faak brûkt foar it befestigjen fan twa of mear objekten byinoar, wêrtroch se ideaal binne foar ferskate yndustry lykas automotive, loftfeart, bou en lânbou.
Ien fan 'e wichtichste foardielen fan it brûken fan dizze hex-bouten is har sterkte en duorsumens.Dizze bouten kinne hege druk en spanning wjerstean, wêrtroch't se ideaal binne foar it befeiligjen fan swiere meganyske apparatuer en masines.Derneist soarget de hurdens fan 'e bouten dat se net gefoelich binne foar ferfoarming of ferfoarming as se ûnderwurpen wurde oan eksterne krêften.
De Hex Bolt Din 931, ISO4014 933, en ISO4017 Grade 4.8 biede superieure prestaasjes yn drege omjouwings.Njonken har korrosjebestindige plating kinne se bleatstelling oan waarmte, kjeld en focht ferneare.Dit is wichtich yn yndustriële ynstellings wêr't ekstreme temperatueren, gemikaliën en wetter skea kinne feroarsaakje oan befestigingen en op syn beurt de yntegriteit fan it heule systeem kompromittearje.
De hex bouten kinne brûkt wurde yn ferskillende foarmen ôfhinklik fan de spesifike yndustry of easken.Guon brûke se mei waskers en moeren foar tafoege feiligens, wylst oaren se brûke mei ankers of skroefpluggen om objekten oan muorren en plafonds te befeiligjen.Nettsjinsteande hoe't se wurde brûkt, spylje de Hex Bolt Din 931, ISO4014 933, en ISO4017 Grade 4.8 in essensjele rol by it byinoar hâlden fan ferskate systemen en projekten.
Ta beslút, hex bouten binne in staple yn ferskate yndustry wrâldwiid, en se bliuwe te bieden útsûnderlike prestaasjes en betrouberens.De Hex Bolt Din 931, ISO4014 933, en ISO4017 Grade 4.8 binne gjin útsûndering, en se jouwe poerbêste wearde foar jild.Dizze bouten binne de rêchbonke fan in protte systemen, en har belang kin net ûnderskatte wurde.
