Hex Nut hege kwaliteit Din 934/ISO4032 klasse 8 Galvanized
| Produkt namme | Carbon Steel Swart DIN934 Hex Nut |
| Standert | DIN,ASTM/ANSI JIS EN ISO,AS,GB |
| Klasse | Staalklasse: DIN: Gr.4.6,4.8,5.6,5.8,8.8,10.9,12.9;SAE: Gr.2,5,8;ASTM: 307A,A325,A490, |
| Finishing | Sink (Giel, Wyt, Blau, Swart), Hop Dip Galvanized (HDG), Swart Okside, Geomet, Dacroment, anodisaasje, Nikkel plated, Sink-Nikkel plated |
| Produksjeproses | M2-M24: Cold Froging, M24-M100 Hot Forging, Machtigingsformulier en CNC foar oanpaste fastener |
| Oanpaste produkten Lead tiid | 30-60 dagen, |
| Fergees Samples foar standert fastener | |
Zeskantmoer DIN 934
Hexmoeren DIN 934 wurde faak brûkt mei bouten en skroeven.De resultaten litte sjen dat de sels-locking fermogen en locking fermogen fan 'e grof hexagon nut binne slimmer as dy fan' e fyn-tooth hexagon nut, mar de locking krêft is grutter as dy fan 'e fyn-tooth hexagon nut;de hexagonmoer mei fyn tosken hat goede skuorjende prestaasjes, dy't geskikt is foar anty-vibraasje en maklik om de klaring oan te passen, mar de skuorkrêft is slimmer as dy fan 'e grouwe hexagonmutter, dus it is geskikt foar it plak wêr't de klaring of koppel moat oanpast wurde.Yn it algemien wurdt de grouwe tried brûkt as der gjin spesjale eask is.
Hexagon nut DIN 934 wurdt in soad brûkt, en it wurdt faak brûkt mei bouten, studs, en screws te ferbinen en fêst.Grade A (tapaslik foar nominale thread diameter D ≤ 16 mm) en klasse B (geskikt foar d> 16 mm) nuts wurde brûkt yn masines, apparatuer, of struktueren mei lytse oerflak rûchheid en hege presyzje easken.It wurdt karakterisearre troch in relatyf grutte tightening krêft, dy't ynstallearre wurde kin mei in beweechbere wrench, in iepen-einige wrench, of in spektakel wrench, dy't allegear fereaskje in gruttere operaasje romte.
DIN 934 is in grutte standert foar nuten.It is de earste standert yn Dútslân.As jo wolle testen oft de meganyske eigenskippen fan 'e moer kwalifisearre binne, moatte jo de DIN 267-4-standert rieplachtsje.
It spesifisearret de deteksjemetoade en deteksjegegevens, yn dizze standert omfettet it seis nivo's fan 4, 5, 6, 8, 10, 12. It bewiisladen fan 'e nuten is konstant, respektivelik 400MPa, 500MPa, 600MPa, 800MPa, 1000MPa, 1200 MPa.
DIN 934 echte klasse 8 en falske klasse 8
Wy leauwe dat DIN 934 net oerienkomt mei de saneamde "wiere" nivo 8 en "false" nivo 8, mar it is gewoan in oare namme foar de standert.
Yn de nije standert, de grutte fan 'e tsjinoerstelde kant is net feroare útsein foar de feroarings fan M10, M12, M14, en M22;lykwols, de dikte fan 'e nôt is wurden dikker, dus de DIN 934 grutte standert, EN 20898-2 meganyske eigenskippen It is ûnwittenskiplik te testen nuts neffens de standert, en it kin net altyd nedich.Gearfetsjend kin DIN 934 allinnich oerienkomme mei DIN 267-4;DIN EN ISO 4032 kin allinnich oerienkomme mei EN 20898-2.
Neffens de ferskillende noarmen hawwe wy de meganyske eigenskippen en diminsjonele noarmen gearstald yn 'e twa noarmen fan DIN 934 |8|en ISO 4032 8 yn in ferlikingstabel foar elkenien om mear te learen oer de wiere betsjutting fan DIN 934 |8|en ISO 4032 8.
DIN 934 – 1987 Hexagon Nuts With Metric Coarse and Fine Pitch thread, Produktklassen A en B
| Thread Grutte | M1 | M1.2 | M1.4 | M1.6 | (M1.7) | M2 | (M2.3) | M2.5 | (M2.6) | M3 | (M3.5) | ||
| P | Pitch | Grof tried | 0.25 | 0.25 | 0.3 | 0,35 | 0,35 | 0.4 | 0.45 | 0.45 | 0.45 | 0.5 | 0.6 |
| Fine tried-1 | / | / | / | / | / | / | / | / | / | / | / | ||
| Fine tried-2 | / | / | / | / | / | / | / | / | / | / | / | ||
| m | max = nominale grutte | 0.8 | 1 | 1.2 | 1.3 | 1.4 | 1.6 | 1.8 | 2 | 2 | 2.4 | 2.8 | |
| min | 0,55 | 0,75 | 0,95 | 1.05 | 1.15 | 1.35 | 1.55 | 1.75 | 1.75 | 2.15 | 2.55 | ||
| mw | min | 0.44 | 0.6 | 0.76 | 0.84 | 0.92 | 1.08 | 1.24 | 1.4 | 1.4 | 1.72 | 2.04 | |
| s | max = nominale grutte | 2.5 | 3 | 3 | 3.2 | 3.5 | 4 | 4.5 | 5 | 5 | 5.5 | 6 | |
| min | 2.4 | 2.9 | 2.9 | 3.02 | 3.38 | 3.82 | 4.32 | 4.82 | 4.82 | 5.32 | 5.82 | ||
| e | min | 2.71 | 3.28 | 3.28 | 3.41 | 3.82 | 4.32 | 4.88 | 5.45 | 5.45 | 6.01 | 6.58 | |
| * | - | - | - | - | - | - | - | - | - | - | - | ||
| per 1000 ienheden ≈ kg | 0.03 | 0.054 | 0.063 | 0.076 | 0.1 | 0.142 | 0.2 | 0.28 | 0.72 | 0.384 | 0.514 | ||
| Thread Grutte | M4 | M5 | M6 | (M7) | M8 | M10 | M12 | (M14) | M16 | (M18) | M20 | ||
| P | Pitch | Grof tried | 0.7 | 0.8 | 1 | 1 | 1.25 | 1.5 | 1.75 | 2 | 2 | 2.5 | 2.5 |
| Fine tried-1 | / | / | / | / | 1 | 1 | 1.5 | 1.5 | 1.5 | 1.5 | 2 | ||
| Fine tried-2 | / | / | / | / | / | 1.25 | 1.25 | / | / | 2 | 1.5 | ||
| m | max = nominale grutte | 3.2 | 4 | 5 | 5.5 | 6.5 | 8 | 10 | 11 | 13 | 15 | 16 | |
| min | 2.9 | 3.7 | 4.7 | 5.2 | 6.14 | 7.64 | 9.64 | 10.3 | 12.3 | 14.3 | 14.9 | ||
| mw | min | 2.32 | 2.96 | 3.76 | 4.16 | 4.91 | 6.11 | 7.71 | 8.24 | 9.84 | 11.44 | 11.92 | |
| s | max = nominale grutte | 7 | 8 | 10 | 11 | 13 | 17 | 19 | 22 | 24 | 27 | 30 | |
| min | 6.78 | 7.78 | 9.78 | 10.73 | 12.73 | 16.73 | 18.67 | 21.67 | 23.67 | 26.16 | 29.16 | ||
| e | min | 7.66 | 8.79 | 11.05 | 12.12 | 14.38 | 18.9 | 21.1 | 24.49 | 26.75 | 29.56 | 32.95 | |
| * | - | - | - | - | - | - | - | - | - | - | - | ||
| per 1000 ienheden ≈ kg | 0.81 | 1.23 | 2.5 | 3.12 | 5.2 | 11.6 | 17.3 | 25 | 33.3 | 49.4 | 64.4 | ||
| Thread Grutte | (M22) | M24 | (M27) | M30 | (M33) | M36 | (M39) | M42 | (M45) | M48 | (M52) | ||
| P | Pitch | Grof tried | 2.5 | 3 | 3 | 3.5 | 3.5 | 4 | 4 | 4.5 | 4.5 | 5 | 5 |
| Fine tried-1 | 1.5 | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 3 | 3 | ||
| Fine tried-2 | 2 | / | / | / | / | / | / | / | / | / | / | ||
| m | max = nominale grutte | 18 | 19 | 22 | 24 | 26 | 29 | 31 | 34 | 36 | 38 | 42 | |
| min | 16.9 | 17.7 | 20.7 | 22.7 | 24.7 | 27.4 | 29.4 | 32.4 | 34.4 | 36.4 | 40.4 | ||
| mw | min | 13.52 | 14.16 | 16.56 | 18.16 | 19.76 | 21.92 | 23.52 | 25.9 | 27.5 | 29.1 | 32.3 | |
| s | max = nominale grutte | 32 | 36 | 41 | 46 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | |
| min | 31 | 35 | 40 | 45 | 49 | 53.8 | 58.8 | 63.1 | 68.1 | 73.1 | 78.1 | ||
| e | min | 35.03 | 39.55 | 45.2 | 50.85 | 55.37 | 60.79 | 66.44 | 71.3 | 76.95 | 82.6 | 88.25 | |
| * | - | - | - | - | - | - | - | - | - | - | - | ||
| per 1000 ienheden ≈ kg | 79 | 110 | 165 | 223 | 288 | 393 | 502 | 652 | 800 | 977 | 1220 | ||
| Thread Grutte | M56 | (M60) | M64 | (M68) | M72 | (M76) | M80 | (M85) | M90 | M100 | M110 | ||
| P | Pitch | Grof tried | 5.5 | 5.5 | 6 | 6 | / | / | / | / | / | / | / |
| Fine tried-1 | 4 | 4 | 4 | / | 6 | 6 | 6 | 6 | 6 | 6 | 6 | ||
| Fine tried-2 | / | / | / | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | ||
| m | max = nominale grutte | 45 | 48 | 51 | 54 | 58 | 61 | 64 | 68 | 72 | 80 | 88 | |
| min | 43.4 | 46.4 | 49.1 | 52.1 | 56.1 | 59.1 | 62.1 | 66.1 | 70.1 | 78.1 | 85.8 | ||
| mw | min | 34.7 | 37.1 | 39.3 | 41.7 | 44,9 | 47.3 | 49,7 | 52.9 | 56.1 | 62,5 | 68.6 | |
| s | max = nominale grutte | 85 | 90 | 95 | 100 | 105 | 110 | 115 | 120 | 130 | 145 | 155 | |
| min | 82.8 | 87.8 | 92.8 | 97,8 | 102.8 | 107.8 | 112.8 | 117.8 | 127,5 | 142,5 | 152,5 | ||
| e | min | 93.56 | 99.21 | 104.86 | 110.51 | 116.16 | 121.81 | 127.46 | 133.11 | 144.08 | 161.02 | 172.32 | |
| * | - | - | - | - | - | - | - | - | - | - | 170 | ||
| per 1000 ienheden ≈ kg | 1420 | 1690 | 1980 | 2300 | 2670 | 3040 | 3440 | 3930 | 4930 | 6820 | 8200 | ||
| Thread Grutte | M125 | M140 | M160 |
|
|
|
|
|
|
|
| ||
| P | Pitch | Grof tried | / | / | / |
|
|
|
|
|
|
|
|
| Fine tried-1 | 6 | 6 | 6 |
|
|
|
|
|
|
|
| ||
| Fine tried-2 | 4 | / | / |
|
|
|
|
|
|
|
| ||
| m | max = nominale grutte | 100 | 112 | 128 |
|
|
|
|
|
|
|
| |
| min | 97,8 | 109.8 | 125,5 |
|
|
|
|
|
|
|
| ||
| mw | min | 78.2 | 87.8 | 100 |
|
|
|
|
|
|
|
| |
| s | max = nominale grutte | 180 | 200 | 230 |
|
|
|
|
|
|
|
| |
| min | 177,5 | 195.4 | 225,4 |
|
|
|
|
|
|
|
| ||
| e | min | 200.57 | 220,8 | 254,7 |
|
|
|
|
|
|
|
| |
| * | 196 | 216 | 248 |
|
|
|
|
|
|
|
| ||
| per 1000 ienheden ≈ kg | 13000 | 17500 | 26500 |
|
|
|
|
|
|
| |||
DIN934 VS ISO4032
| Thread Grutte | M1 | M1.2 | M1.4 | M1.6 | (M1.7) | M2 | (M2.3) | M2.5 | (M2.6) | M3 | (M3.5) | ||
| P | Pitch | Grof tried | 0.25 | 0.25 | 0.3 | 0,35 | 0,35 | 0.4 | 0.45 | 0.45 | 0.45 | 0.5 | 0.6 |
| Fine tried-1 | / | / | / | / | / | / | / | / | / | / | / | ||
| Fine tried-2 | / | / | / | / | / | / | / | / | / | / | / | ||
| m | max = nominale grutte | 0.8 | 1 | 1.2 | 1.3 | 1.4 | 1.6 | 1.8 | 2 | 2 | 2.4 | 2.8 | |
| min | 0,55 | 0,75 | 0,95 | 1.05 | 1.15 | 1.35 | 1.55 | 1.75 | 1.75 | 2.15 | 2.55 | ||
| mw | min | 0.44 | 0.6 | 0.76 | 0.84 | 0.92 | 1.08 | 1.24 | 1.4 | 1.4 | 1.72 | 2.04 | |
| s | max = nominale grutte | 2.5 | 3 | 3 | 3.2 | 3.5 | 4 | 4.5 | 5 | 5 | 5.5 | 6 | |
| min | 2.4 | 2.9 | 2.9 | 3.02 | 3.38 | 3.82 | 4.32 | 4.82 | 4.82 | 5.32 | 5.82 | ||
| e | min | 2.71 | 3.28 | 3.28 | 3.41 | 3.82 | 4.32 | 4.88 | 5.45 | 5.45 | 6.01 | 6.58 | |
| * | - | - | - | - | - | - | - | - | - | - | - | ||
| per 1000 ienheden ≈ kg | 0.03 | 0.054 | 0.063 | 0.076 | 0.1 | 0.142 | 0.2 | 0.28 | 0.72 | 0.384 | 0.514 | ||
| Thread Grutte | M4 | M5 | M6 | (M7) | M8 | M10 | M12 | (M14) | M16 | (M18) | M20 | ||
| P | Pitch | Grof tried | 0.7 | 0.8 | 1 | 1 | 1.25 | 1.5 | 1.75 | 2 | 2 | 2.5 | 2.5 |
| Fine tried-1 | / | / | / | / | 1 | 1 | 1.5 | 1.5 | 1.5 | 1.5 | 2 | ||
| Fine tried-2 | / | / | / | / | / | 1.25 | 1.25 | / | / | 2 | 1.5 | ||
| m | max = nominale grutte | 3.2 | 4 | 5 | 5.5 | 6.5 | 8 | 10 | 11 | 13 | 15 | 16 | |
| min | 2.9 | 3.7 | 4.7 | 5.2 | 6.14 | 7.64 | 9.64 | 10.3 | 12.3 | 14.3 | 14.9 | ||
| mw | min | 2.32 | 2.96 | 3.76 | 4.16 | 4.91 | 6.11 | 7.71 | 8.24 | 9.84 | 11.44 | 11.92 | |
| s | max = nominale grutte | 7 | 8 | 10 | 11 | 13 | 17 | 19 | 22 | 24 | 27 | 30 | |
| min | 6.78 | 7.78 | 9.78 | 10.73 | 12.73 | 16.73 | 18.67 | 21.67 | 23.67 | 26.16 | 29.16 | ||
| e | min | 7.66 | 8.79 | 11.05 | 12.12 | 14.38 | 18.9 | 21.1 | 24.49 | 26.75 | 29.56 | 32.95 | |
| * | - | - | - | - | - | - | - | - | - | - | - | ||
| per 1000 ienheden ≈ kg | 0.81 | 1.23 | 2.5 | 3.12 | 5.2 | 11.6 | 17.3 | 25 | 33.3 | 49.4 | 64.4 | ||
| Thread Grutte | (M22) | M24 | (M27) | M30 | (M33) | M36 | (M39) | M42 | (M45) | M48 | (M52) | ||
| P | Pitch | Grof tried | 2.5 | 3 | 3 | 3.5 | 3.5 | 4 | 4 | 4.5 | 4.5 | 5 | 5 |
| Fine tried-1 | 1.5 | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 3 | 3 | ||
| Fine tried-2 | 2 | / | / | / | / | / | / | / | / | / | / | ||
| m | max = nominale grutte | 18 | 19 | 22 | 24 | 26 | 29 | 31 | 34 | 36 | 38 | 42 | |
| min | 16.9 | 17.7 | 20.7 | 22.7 | 24.7 | 27.4 | 29.4 | 32.4 | 34.4 | 36.4 | 40.4 | ||
| mw | min | 13.52 | 14.16 | 16.56 | 18.16 | 19.76 | 21.92 | 23.52 | 25.9 | 27.5 | 29.1 | 32.3 | |
| s | max = nominale grutte | 32 | 36 | 41 | 46 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | |
| min | 31 | 35 | 40 | 45 | 49 | 53.8 | 58.8 | 63.1 | 68.1 | 73.1 | 78.1 | ||
| e | min | 35.03 | 39.55 | 45.2 | 50.85 | 55.37 | 60.79 | 66.44 | 71.3 | 76.95 | 82.6 | 88.25 | |
| * | - | - | - | - | - | - | - | - | - | - | - | ||
| per 1000 ienheden ≈ kg | 79 | 110 | 165 | 223 | 288 | 393 | 502 | 652 | 800 | 977 | 1220 | ||
| Thread Grutte | M56 | (M60) | M64 | (M68) | M72 | (M76) | M80 | (M85) | M90 | M100 | M110 | ||
| P | Pitch | Grof tried | 5.5 | 5.5 | 6 | 6 | / | / | / | / | / | / | / |
| Fine tried-1 | 4 | 4 | 4 | / | 6 | 6 | 6 | 6 | 6 | 6 | 6 | ||
| Fine tried-2 | / | / | / | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 | ||
| m | max = nominale grutte | 45 | 48 | 51 | 54 | 58 | 61 | 64 | 68 | 72 | 80 | 88 | |
| min | 43.4 | 46.4 | 49.1 | 52.1 | 56.1 | 59.1 | 62.1 | 66.1 | 70.1 | 78.1 | 85.8 | ||
| mw | min | 34.7 | 37.1 | 39.3 | 41.7 | 44,9 | 47.3 | 49,7 | 52.9 | 56.1 | 62,5 | 68.6 | |
| s | max = nominale grutte | 85 | 90 | 95 | 100 | 105 | 110 | 115 | 120 | 130 | 145 | 155 | |
| min | 82.8 | 87.8 | 92.8 | 97,8 | 102.8 | 107.8 | 112.8 | 117.8 | 127,5 | 142,5 | 152,5 | ||
| e | min | 93.56 | 99.21 | 104.86 | 110.51 | 116.16 | 121.81 | 127.46 | 133.11 | 144.08 | 161.02 | 172.32 | |
| * | - | - | - | - | - | - | - | - | - | - | 170 | ||
| per 1000 ienheden ≈ kg | 1420 | 1690 | 1980 | 2300 | 2670 | 3040 | 3440 | 3930 | 4930 | 6820 | 8200 | ||
| Thread Grutte | M125 | M140 | M160 |
|
|
|
|
|
|
|
| ||
| P | Pitch | Grof tried | / | / | / |
|
|
|
|
|
|
|
|
| Fine tried-1 | 6 | 6 | 6 |
|
|
|
|
|
|
|
| ||
| Fine tried-2 | 4 | / | / |
|
|
|
|
|
|
|
| ||
| m | max = nominale grutte | 100 | 112 | 128 |
|
|
|
|
|
|
|
| |
| min | 97,8 | 109.8 | 125,5 |
|
|
|
|
|
|
|
| ||
| mw | min | 78.2 | 87.8 | 100 |
|
|
|
|
|
|
|
| |
| s | max = nominale grutte | 180 | 200 | 230 |
|
|
|
|
|
|
|
| |
| min | 177,5 | 195.4 | 225,4 |
|
|
|
|
|
|
|
| ||
| e | min | 200.57 | 220,8 | 254,7 |
|
|
|
|
|
|
|
| |
| * | 196 | 216 | 248 |
|
|
|
|
|
|
|
| ||
| per 1000 ienheden ≈ kg | 13000 | 17500 | 26500 |
|
|
|
|
|
|
| |||
